Re: 26 inch Dynafocal mount for IO-360 on SA300


[ Follow Ups ] [ Post Followup ] [ Starduster Bulletin Board ] [ FAQ ]

Posted by Paul L. Bragg, Jr. (159.49.254.2) on October 13, 2005 at 21:48:32:

In Reply to: 26 inch Dynafocal mount for IO-360 on SA300 posted by Rich Schlerf on October 09, 2005 at 09:26:14:

Rich, here is the info for the welder. Roger Farnes, 6742 St. James Ct., Riverside, CA. 92504, Ph. (909)519-4427.Hope this helps. I would recommend using 3/8" for the main attach bolts, especially if you plan on doing any acro. I think the plans call for 5/16". Also, you may want to add a center cross brace, not so much for strength as for a place to secure engine control cables. He uses a 6 tube (3 cluster each side) design. I supplied my own dynafocal ring, purchased from ACS. Let me know on any further questions. WARNING! for any lowlifes that would use the above information for no good. I'll hunt you down and put lead in your ass like a duck! Paul.


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Starduster Bulletin Board ] [ FAQ ]